A boot rack is a great way to keep boots off the floor in a home or apartment. This is something that can easily be made with just a few basic materials. You can find the materials to make a basic DIY boot rack at a home improvement store. However, the proper tools will be needed to complete this project.
Hanging boots after they have been worn is a simple way to ensure they remain dry. This is something that will be invaluable when in cold climates or during winter months. A basic boot rack can be mounted on any wall or a closet door and can be done easily with the use of screws or nails.
The first step when you are ready to make a DIY boot rack is to make a list of materials. You will need a 4-foot 2 x 8 board. The pegs will be made from a dowel that measures eight feet. A basic circular saw will be used to cut the dowel to the proper size. Wood glue is also needed to finish the project. You can find wood glue at any home improvement or local hardware store.
Make sure the pegs are properly spaced or boots may not fit properly on your rack. The DIY boot rack can be stained or painted once assembly is complete. Holes will need to be measured and drilled using a power drill so that the dowels can be accurately placed in the holes you made in the wood.
A DIY boot rack can be a great addition to a garage or an entryway in a home. Boots on the floor are a trip hazard when they are not seen. If you make a simple rack from wood, then it can be a match to the look of any room.
Each step that is required for this project is available on ana-white.com here…